Let me begin this post by saying we made this night sky playdough NINE MONTHS ago and it is still going strong!
I don’t know how, I don’t know why, but this playdough lasts forever. (We store it in a ziploc storage bag inside a cupboard inside a cool room).
We’ve used it to study constellations, galaxies, planets and for just plain fun. The glitter – which was my main concern – magically stays contained inside the playdough.
Again, I don’t know how. It’s just plain magic, folks.
Here is the Recipe for Night Sky Playdough:
Mix together:
2 cups white flour
1 cup fine salt
3 Tbsp cream of tartar (helps make it smooth and elastic)
Stir in:
1.5 Tbsp vegetable oil
2 cups of boiling water (carefully!)
5-10 drops blue or purple food coloring
Knead it together until it’s nice and smooth. Then, pour a small amount of glitter in the center of the dough, and knead it in a little at a time.
Add star sequence or beads and press them in to make constellations.
Or, use stars or marbles to make galaxy spirals.
Use different colors of playdough to form planets and create a solar system.
There are so many ways you can play with this playdough!
Don’t forget to subscribe to my email newsletter for updates on new crafts, nature printables and FREEBIES!
One of the first things most people say when they walk into our house for the first time is “WHERE did you get that door?”
Let me take you back two years ago to when we moved into our current home, gutted it and began the process of piecing it back together ourselves. During demo day, pretty much everything in the main living areas and kitchen were ripped out – flooring, doors, baseboards, cabinets, appliances, even walls.
We have a double entryway closet right behind the front door, which holds all of our coats, gloves, shoes, backpacks etc. The closet had old-fashioned accordion doors – very impractical, since you couldn’t really open the front door and have the closet doors open at the same time.
Which means a lot of opening and closing. With two little boys. All day long. And they were half broken to begin with.
So, yeah, the doors were one of the first things to go.
A sliding door was really the perfect solution for closing off the side of the closet that has all of our coats and shoes and basically looks like a trash heap most of the time. We’ve had it for a year now and it’s working out wonderfully.
DIY Sliding Barn Door on a Budget
First – let me preface this by saying my dad built this door, and wrote the instructions for this post. So, other than coming up with the design for the door, I take zero percent credit.
Okay, moving on.
Materials and Supplies
Shiplap Wood Pieces – 5″ wide (you can find these at Home Depot), or Tongue-and-Groove Wood Pieces
3″ Strips of Wood for Stabilizing
4 1/2″ x 3/4″ Wood for Front Side Trim (we used 1×6’s ripped lengthwise to size)
Determine the dimensions needed for your sliding door and cut shiplap pieces to height. Make sure you account for any trim you want the door to cover.
Step Two
Lay out shiplap pieces side-by-side and upside-down on top of saw horses or a work table to form a rectangle – this will be the base door. The pieces should be overlapping and face down at this point.
Use a metal right angle to get the four corners to a 90 degree angle. This was the hardest step, because shiplap pieces usually aren’t cut perfectly straight.
Step Three
Once the shiplap pieces are squared up, cut three thin 3″ strips of wood the same width as your base door, and screw into the top, middle and bottom of the back of the door (see photo). This will help to stabilize the shiplap pieces so they don’t wobble.
Be careful to keep the corners at right angles during this step.
Step Four
Carefully flip the door over to face up. At this point, it won’t be very sturdy and that’s okay.
Step Five
Make your trim using the circular saw. We used 4 1/2″ x 3/4″ wood pieces to create the trim on the door. We added a border around the edge and across the middle of the door width-wise. We also added an “X” on the bottom to give it a barn door look.
Step Six
Glue the four outside borders on the door using the construction adhesive, again making sure all four corners are at right angles. Clamp the corners down using c-clamps or spring loaded clamps and leave overnight. The next day, glue and clamp the middle piece and bottom X pieces and let sit overnight. At this point the door will be sturdy.
Step Seven
Paint door and let dry 48 hours. Apply antiquing wax and let dry.
Step Eight
Add handle and rail brackets to door, and install the rail to your door frame according to the rail’s instructions. At this point we also added a right angle plastic guide rail (similar to what’s used on sliding closet doors) to the floor in both the back and front of the door to keep the door from swaying during use. I’m so glad we added this piece!
Just ignore the dirty floor
Step Nine
Hang your door and admire your work!
Please let me know if you decide to try this tutorial and any troubleshooting questions you may have!
**I’m an affiliate of Amazon, which means every purchase from product links helps keep this website going. I only write about things I’m truly passionate about, and products I actually recommend and use for our family.**
